Instructions for use:

  1: The first level of tension Monitor installed near the product that needs winding end, out packing boxes of green connectors.
        DC24V positive -------- 7 feet-bit access
        DC24V negative -------- 8 feet-bit access
   2, press the zero key (the program will automatically set the tension value of zero).
   3, upper and lower limits set tension value.
        1), press the SET button, the indicator lights red, the tension limit is set (set to confirm press SET).
        2), set the upper limit (see the digital display four zeros)
        Example: Suppose the upper limit value of "850 grams", the lower limit value of "620 grams"
        1), through the shift key ">" to confirm the value in the single digits or in the hundreds digit, by incrementing key "▲" to set the value of 0-9 (one hundred eight, ten 5, bits 0) .
        2), and then press the SET button to confirm, white lights set the minimum tension value.
        3), through the shift key ">" to confirm the value in the single digits or in the hundreds digit, by incrementing key "▲" to set the value of 0-9 (one hundred six, ten two, bits 0) . Then press the SET button to confirm.